Magellan MAP 410 GPS Receiver User Manual


  Open as PDF
of 88
 
30 Magellan MAP 410 GPS Receiver
Non-User Waypoints
Non-User waypoints are waypoints that are uploaded into your receiver that
display destinations of interest, including their coordinates and their name.
Non-User waypoints are not editable and are permanently stored in your
receiver’s memory and cannot be deleted unless written over by waypoints
downloaded from the MapSend™ CD (see the Accessories Appendix for
further details).
SAVING A WAYPOINT (USER ONLY)
Waypoints are used to create routes and GOTOs. You have two options
when naming waypoints. You can create waypoints with either a receiver-
created name or with a name you create yourself.
Saving Your Position Fix with a Receiver-Generated Name
From anywhere in the receiver, you can save (MARK) your position with a
receiver created name. This is the fastest way to save your position.
To save a waypoint with a receiver-created name, press and hold MARK
and press and hold MARK again. The waypoint will be saved with a
receiver-generated name beginning with WPT001, WPT002 and so on.
Saving Your Position Fix with a User-Created name
Use the following keystrokes to save your current position
with a name you choose.
CREATING A WAYPOINT (USER ONLY)
This allows you to create a waypoint at a position where
you are not currently located.
EDITING A WAYPOINT (USER ONLY)
This sections deals with the following options: editing a waypoint name,
editing the waypoint icon, editing coordinates, editing elevation and editing
a message.
Use ARROW KEYS to enter
the alphanumeric characters
of the name you choose.
ENTER
MARK
ENTER
MARK
ENTER
MARK
(PRESS & HOLD)
Use ARROW KEYS
to highlight the waypoint
icon of your choice.
ENTER
MARK
Use UP/DOWN
ARROWS to
highlight SAVE WPT.
ENTER
MARK
ENTER
MARK
Use UP/DOWN ARROW
KEYS to highlight the
field you wish to change.
Use ARROW KEYS to
input the data for
the desired fields.
Use UP/DOWN
ARROW KEYS to
highlight SAVE WPT.
ENTER
MARK
ENTER
MARK
ENTER
MARK
Use ARROW KEYS to enter
the alphanumeric characters
of the name you choose.
ENTER
MARK
ENTER
MARK
ENTER
MARK
ENTER
MARK
ENTER
MARK
Use ARROW KEYS
to highlight the waypoint
icon of your choice.
ENTER
MARK
(PRESS & HOLD)
MARK
34˚06.56N
117˚49.60W
900 FT
11:23PM
12JUN99
CREATE MSG
SAVE WPT
SAVE TO RTE
DOCK
MARK
34˚06.56N
117˚49.60W
900 FT
11:23PM
12JUN99
CREATE MSG
SAVE WPT
SAVE TO RTE
DOCK
 previous next