Filter
Top Products
On the road 4-25
Wipers and washers
The windscreen wipers and screen wash
functions are controlled by the right-hand
column stalk switch and only operate
with the ignition in position ‘II’.
Windscreen wipers
The stalk functions are as follows:
Position (A):
Flick wipe.
Position (B):
The windscreen wipers are Off and
parked.
First position (C):
Intermittent wipe.
Second position (D):
Slow wiper operation.
Third position (E):
High speed wiper operation.
Intermittent wipe
When intermittent wipe is selected the
delay between wipes can be varied. Turn
the collar (F) to vary the delay from
1 second to 22 seconds.
Flick wipe
Pull the column switch downwards for a
single wipe. Holding the column switch in
this position will operate the wiper
continuously at slow speed until released.
Rain sensitive wiper control
When AUTO, (turn the rotary collar (F) to
AUTO) and intermittent wipe is selected,
the wipers will automatically operate to
clear the windscreen when rain falls on to
the windscreen, or when moisture is
present.
For the wipers to operate, the ignition
switch must be in position ‘II’.
Caution: Ensure that AUTO is not
selected when entering a car wash or
damage to the wiper blades/arms can
occur.