Filter
Top Products
Maintenance 7-3
Bonnet release
!
WARNING:
Take care to keep away from rotating components if the
engine is running when you open the bonnet.
Release the bonnet lock by pulling the lever below the fascia on
the driver’s side of the vehicle.
Lift the bonnet slightly and pull up the safety catch under the
bonnet, located centrally behind the grille. The gas filled struts
will assist raising the bonnet, and retain it in the fully open
position.
!
WARNING:
Before closing the bonnet ensure that no one is
obstructing the closing area and that hands and clothes
are clear. Remove tools, cleaning cloths, etc., from the
engine compartment.
Bonnet closing
Close the bonnet to within a distance of 250 to 300 mm
(10 to 12 inches) of the fully closed position, then let go to allow
the bonnet to shut. Check by pulling the bonnet that both the
right-hand and left-hand latches are engaged.