Filter
Top Products
2-4 Security and locks
Key transmitter battery renewal
When the battery needs renewal there will be a significant
decrease in the effective range of the key transmitter.
To renew the battery, using a small, flat-blade screwdriver,
separate and pull the transmitter (A) from the key body. Insert
the screwdriver into the groove between the covers (B) and, by
twisting the screwdriver, prise the covers apart. Unscrew and
remove the small screw (C) and remove the printed circuit
board, taking care not to touch the battery terminals. Remove
the battery and dispose of safely. Fit a new cell, type CR2032,
available from your Jaguar Dealer, with the side marked with the
positive symbol (+) downwards in the battery receptacle. Avoid
touching the new battery as moisture/oil from the fingers can
reduce the life of the battery and corrode the contacts. Replace
the printed circuit board making sure to engage the board under
the securing tabs (D), and secure with the screw. Refit the cover
and click into place with thumb pressure. Slide the transmitter
back onto the key body.
A