Filter
Top Products
6-12 Roadside emergency
Bulb renewal
It is important that only Jaguar bulbs of
the type specified are used when
renewing bulbs.
Before renewing bulbs, switch off the
ignition and light switches.
Caution: Halogen type bulbs will be
damaged if touched by hand or
contaminated with oil or grease. It is
important to use clean gloves or cloth
when handling a bulb which is to be
used again. A contaminated bulb may
be cleaned with methylated spirit
before refitting.
Main beam (inner) headlight
Open the bonnet.
Turn the circular cover (A) anti-clockwise
and remove.
Press the spring clip (B) towards the bulb
and downwards to release the bulb.
Remove the bulb/connector (C) from the
headlight assembly. Pull the connector
from the bulb.
Attach the connector to the new bulb,
type H1 for main beam, and fit to the
headlight. The bulb will only correctly fit
in one position.
Engage the spring clips to retain the bulb
and then fit the circular cover.
Refit the top cover and close the bonnet.
It is advisable to have the headlight aim
checked by a Dealer after bulb renewal.