Filter
Top Products
6-8 Roadside emergency
Fit the spare wheel and loosely secure
with the wheel nuts.
Using the wheel nut wrench, lightly
tighten the wheel nuts alternately using
the sequence shown in the illustration.
Lower the jack and tighten the wheel nuts
alternately, DO NOT OVERTIGHTEN.
At the earliest opportunity have the
wheel nuts tightened with a torque
wrench to:
Alloy wheels:
• 103 Nm ± 15.5 (75.95 lb.ft. ± 11.4).
Steel wheels:
• 80 Nm ± 12.0 (9.0 lb.ft. ± 8.5).
This torque must not be exceeded.
Stowing the equipment
Stow the jack and wrench.
Stow the replaced road wheel in the
luggage compartment, position the wheel
and secure with the retaining nut.
Reposition the luggage compartment floor
panel.
Note: Examine the jack occasionally and
clean and grease the threads to ensure it is
always ready for an emergency.