Filter
Top Products
On the road 4-19
Auto (D) – A light sensor control,
mounted on the front of the interior
mirror fixing cover, monitors exterior
light levels and automatically switches the
sidelights and dipped headlights ON or
OFF.
The ignition switch must be in position ‘II’
for automatic light operation.
When light fades to the non-adjustable,
pre-set level, the sidelights and headlights
will switch ON automatically.
As light increases to the pre-set level, the
sidelights and headlights switch OFF
automatically.
Do not cover the sensor and keep the
windscreen clean. Obstructing the light in
this area may lead to unwanted operation
of the sidelights and headlights.
Front fog lights (E)
With the switch in sidelight or dip
position, pull the switch to its first
position to turn on the front fog lights.
Pushing the switch in or turning it to OFF
will turn off the front fog lights.
The front fog lights should only be used
when visibility is severely restricted by
fog.
Front fog lights cannot be used with main
beam headlights. If main beam headlights
are switched on when the front fog lights
are on, the front fog lights will be
switched off.
The front fog lights will not turn on if they
are selected when main beam headlights
are on.
Rear fog lights (F)
With the switch in any position except
OFF, pull the switch to its second
position to turn on the rear fog lights.
This will also turn on the front fog lights
unless main beam is selected. Pushing the
switch in or turning it to OFF will turn off
the rear fog lights.
Daylight running lights
In certain countries it is a legal
requirement for the lights to be on during
the hours of daylight.
With the rotary light switch in the OFF
position (A), dipped headlights, sidelights,
tail, number plate lights and, (where
fitted), side marker lights will switch on
automatically with the following
conditions:
• the ignition is turned to position ‘II’,
• the vehicle gear selector out of park
(automatic transmission only)
• the handbrake not applied (released).