Filter
Top Products
6-4 Roadside emergency
Wheel changing and jacking
Be prepared for a flat tyre. Know where equipment is stowed
and read the wheel changing and jacking instructions carefully.
Pull off the road completely, clear of all traffic and park on as
level, solid ground as possible. Switch on hazard warning lights
and, where legally required, display the warning triangle.
!
WARNING:
It can be dangerous to change a wheel when the vehicle
is on a slope or soft, uneven ground.
The spare wheel and jacking equipment are stored under the
luggage compartment floor panel.
To remove the spare wheel, lift the luggage compartment floor
panel. If a temporary-use spare wheel is stowed then the tray
will need to be removed to gain access to the wheel. Unscrew
the retaining nut (A) and remove the spare wheel. Remove the
jack and wheel nut wrench (and locking wheel nut kit, if fitted).