Filter
Top Products
On the road 4-15
Clearing messages
Messages can be hidden by pressing
RESET on the trip computer switchpack.
One press will hide one message. Once
all messages have been hidden, the
display will show trip data, a further press
will display the odometer reading.
If RESET is pressed again, all active
messages will be ‘re-displayed’.
Repeatedly pressing the RESET button will
cycle through the trip, odometer and
message modes.
If a fault occurs when in trip computer or
odometer mode, the relevant message
will be displayed immediately.
If a trip computer function is selected by
pressing the TRIP button while messages
are displayed, the trip data will be
displayed for 10 seconds, then the
message will reappear.
Hidden messages reappear after an
ignition OFF/ON cycle, if the fault
remains.