Filter
Top Products
83
Lighting
R
License plate lamp
1. Insert a wide flat bladed suitable tool,
twist and lever the lens out of the
surround panel. Ensure that the lens
moves to the outer edge of the
surround panel to release the
securing tangs.
2. Twist and pull out the bulb holder
complete with bulb.
3. Pull the bulb out of the bulb holder.
4. Insert the new bulb (W5WL).
5. Refit the lens by locating the outboard
securing tangs first and then pressing
it firmly into the recess until it clicks.
Side repeater indicator
1. Push the lens firmly towards the rear
of the vehicle and withdraw the light
unit from the wing panel.
2. Twist to release the bulb holder from
the lens unit.
3. Pull the bulb out of the bulb holder.
4. Insert the new bulb (WY5W) and
repeat the above procedure in the
reverse order.
JAG0153G
1
3
1
3
JAG0154G