Filter
Top Products
79
Lighting
R
Refitting the headlamp unit
1. Reconnect the wiring multi-plug
connector.
2. Offer up the unit into position.
3. Ensure that the locating peg is fitted
into the in-board locating hole.
4. To secure the headlamp unit, first
secure the wheel arch screw, then
repeat the removal procedure in the
reverse order, ensuring that the
powerwash pipe is reconnected.
Note: After the replacement of any bulb
and the fitting of the headlamp unit, the
aim of the headlamps should be checked
by a Jaguar Dealer.
Front side marker lamp
1. Remove the headlamp unit, see page
78.
2. Twist the bulb holder counter
clockwise and pull out the bulb
complete with the bulb holder.
3. Pull the bulb out of the bulb holder.
4. Insert the new bulb (WY5W) and
repeat the above procedure in reverse
order.
JAG0147G
3
JAG0148G
2
3