Filter
Top Products
181
Automatic Speed Limiter (ASL)
R
When ASL is selected and a set speed
inserted, the engine will respond normally
up to the set speed. Further accelerator
pedal pressure will not increase the
vehicle speed beyond your set speed
Suspending ASL
ASL can be suspended by pressing the
CANCEL button 3. Applying sudden,
rapid acceleration (kickdown) will also
suspend ASL.
Resuming ASL
If ASL has been suspended, it can be
reinstated with a single press of the
RESUME button 2, however, ASL will
only reinstate if the vehicle speed is less
than the current speed set in memory and
greater than 30km/h (18mph). The
message centre will display an
appropriate message if the vehicle speed
is too fast to resume ASL.
Exceeding the set speed
If the set speed is exceeded, e.g. on a
steep downhill section, the message
centre will display an appropriate
message along with an amber warning
light.
There are three categories of over limit
displays:
1. If the set speed is exceeded by up to
15km/h (9mph), the message centre
will display the message along with an
amber warning light
2. If the set speed is exceeded by more
than 15km/h (9mph), the message
centre will display the message along
with a flashing amber warning light.
3. If the set speed is exceeded by more
than 15km/h (9mph) for a duration of
five seconds, the message centre will
display the message along with a
flashing amber warning light and also
give an audible warning tone.
Use your brakes to rectify the situation.
ASL unavailable
If ASL is not available due to a fault, the
message centre will display an
appropriate message along with an
amber warning light.
The message and warning light will
display continuously while ASL is
selected. See Information Displays, page
118.
When the ignition is switched off, ASL is
deactivated and any set speed is deleted
from memory.
LIMITER
CANCELLED
TOO FAST TO
RESUME
OVER LIMIT
XXX MPH
LIMITER NOT
AVAILABLE