Filter
Top Products
Audio
192
L
DSP (Digital Signal Processing): To
optimise the sound for specific seating
positions select DSP and then select the
required seating position.
Either Front, Driver or All may be
selected.
Bal/Fade: The sound can be optimised
by using the scrolling buttons to alter the
Balance (left to right) and Fade (front to
rear).
Options and PTY functions are the same
as for the Jaguar Sound System, refer to
Settings on page 187.
RADIO BROADCAST DATA
SYSTEM (RBDS)
Your radio is equipped with RBDS, which
enables the audio unit to receive
additional information with normal radio
signals.
When tuned to certain stations on the FM
waveband the radio decodes signals
transmitted to provide the following
functions (dependent upon the service
available from the broadcasters).
Note: Not all FM radio stations broadcast
RBDS. If a non-RBDS station is received,
RBDS features will not be available.
• RBDS station name display:
When RBDS is selected the station
name is displayed.
• RDS Priority programme type auto
re-tuning (where broadcast):
Can be selected to interrupt and
switch to the selected programme
type e.g. News, for its duration or can
be used to search for specific PTY
stations.
If the RBDS function does not respond
correctly, see the trouble-shooting guide
on the next page.
Audio Settings
Sound
Bal/Fade
Options
Base
Treble
Sub
Stereo 3 Ch.
DSP
DSP
PLII
PTY
12 : 26 pm
JAG0304NAS
Audio Settings
DSP
Front
Driver
All
12 : 26 pm
JAG0305NAS
Audio Settings
Sound
Bal/Fade
Options
PTY
12 : 26 pm
JAG0309NAS