![](http://pdfasset.owneriq.net/2/52/252a2b91-d9a8-4275-9653-62b558204f78/252a2b91-d9a8-4275-9653-62b558204f78-bgb.png)
11
Quick Start
R
WINDOWS/DOOR MIRRORS
Front windows
The windows are fitted with a facility that
allows them to be fully opened or closed
with a single operation of the switch.
• To open the window, press the
respective switch. Press the switch
again to stop the window from fully
opening.
• To close the window, pull the switch
up. Pull the switch again to prevent to
window from closing fully.
Door mirror adjustment
Press the L (left) or R (right) button to
select the required mirror for adjustment.
Use the four-way switch 1 to adjust the
position of the selected mirror.
Mirror dip when reversing
The passenger door mirror can be
programmed to dip automatically when R
(reverse) is selected. This will provide a
better view along the side of the vehicle to
aid parking. The dip position of the mirror
can be adjusted via the four-way switch.
This feature can be enabled/disabled via
the Vehicle - Parking settings on the
Touch-screen.
SEAT POSITION MEMORY
Driver’s seat
Once you have adjusted the driver’s seat,
steering column, and exterior mirrors, the
vehicle can memorise these settings for
future use.
1. Push the memory button M, the red
LED will illuminate for five seconds.
2. Whilst the LED is illuminated, press
button 1, 2, or 3, to memorise the
current settings.
The LED will extinguish, and a chime will
sound to confirm that the settings have
been memorised. If the ignition is on, the
message centre will display a
confirmation message.
Passenger seat
The procedure to memorise a passenger
seat position is the same as that for the
driver’s seat with two exceptions. There
will be no chime or message to confirm
the settings.
JAG0431 L
1
JAG0432L