Filter
Top Products
119
Information Displays
R
Note: The message centre information
messages and their meanings are detailed
within the appropriate subject sections.
TRIP COMPUTER
The computer memory stores data for a
journey or series of journeys until it is
reset to zero.
The displayed information is for guidance
only, as it can be affected by traffic, road
and weather conditions.
Three independent memories are
available, A, B and Auto. A and B
memories can be set independently, while
the Auto trip will reset after every ignition
cycle as the vehicle moves.
Full trip computer information for the trip
memories can be displayed on the vehicle
touch-screen located in the centre
console, while current selected trip
computer information is displayed on the
instrument cluster message centre.
To access the trip computer touch-screen
settings:
• From the main Home touch-screen
menu, select Vehicle.
• Select Trip computer.
• Select requirements from the menu.
A system flow chart is given on page 128.
Trip computer message centre display
Vehicle total distance travelled 1, trip
distance 2 are displayed as well as,
average fuel economy and average speed
if selected via the touch-screen. Also A, B
or Auto will be displayed, depending on
the current memory selected.
Odometer
The odometer shows the total vehicle
distance travelled since the vehicle was
new.
The odometer and trip distance reading is
displayed in either miles or kilometres,
depending on the units selected via the
touch-screen, see page 128.
Changing the display
Press the TRIP button on the end of the
left column stalk switch repeatedly to
display the message centre data in the
following order:
• trip distance
• average speed
• average fuel consumption
• range.
Trip distance (A, B and Auto)
Distance travelled since the last memory
reset. The maximum trip reading is 16,090
kilometres (9,999.9 miles). The computer
will automatically reset to zero if this
distance is exceeded.
MILES
10849
A :
238.7
JAG0532N
1
2
JAG0049G