Filter
Top Products
Navigating
the Trip
Turn the LARGE knob to scroll through the navigation
screens. Notice the GPS signal screen. No received signals
are shown while you use the simulator.
Notice the present position screen. Your track shows
directly on course with no deviation from the bearing to
the destination. The lat/lon coordinates change to reflect
your present position to the nearest hundredth of a minute.
Note
GPS altitude is invalid while you use the simulator. No
GPS altitude value shows on the display.
Continue to turn the LARGE knob to check the other
navigation screens. The bearing/ETA/track screen shows
your the bearing and desired track to the destination. UTC
time is invalidwhile youuse the simulator. For thisreason,
no ETA shows on the display.
Apollo 360 GPS Receiver Tutorial
P/N 560-0123-01 C-5