Filter
Top Products
Resuming
a Route
Select “RESUME” to resume a route on hold.
Route
“Direct
To”
While navigating a route, you may wish to bypass one or
more waypoints and proceed directly to a destination
waypoint. The route “Direct To” feature allows you to do
this.
Select the active route from the route menu. Then, select
“EDIT” as if creating or modifying a route.
Turn the LARGE knob to move the marker arrow to the
waypoint to which you wish to navigate. Then, press the
GOTO/NRST key. Press the ENT key to enter the
waypoint as the destination.
The route screen shows “direct” status to the waypoint.
You can now navigate directly to the desired destination
waypoint, bypassing previous waypoints in the route.
Navigating a Trip Apollo 360 GPS Receiver
4-22 P/N 560-0123-01