Filter
Top Products
Stopping
or
Holding a
Route
While flying a route, you may wish to deviate temporarily
from your intended flight plan. You may then want to
resume travel on this route. You can “hold” the route to do
this. A route on “hold” can be resumed later from the
current leg. “Holding” a route leaves the route active, but
stops leg sequencing while you deviate from the planned
course of travel.
In other cases, you may wish to abandon an active route to
navigate a different route or to travel to waypoints not in
the route.Press the GOTOkey, dial in anew waypoint, and
press the ENT key. If the new waypoint is not in the active
route, the route will be stopped. If you wish just to stop the
route, use the “Stop” option.
Stop or hold the active route by selecting it from the route
menu. Press andholdtheENTkeytoselectthe active route.
Select “STOP” or “HOLD” the route. You can also select
“QUIT” to avoid any action and return to the active route
screen.
Apollo 360 GPS Receiver Navigating a Trip
P/N 560-0123-01 4-21