Filter
Top Products
Changing
a
Waypoint
To change awaypoint in a route, begin by editing the route
as you did to insert a waypoint.
How to Do This
1 Choose the route to
change. You can
choose any route and
change any or all
waypoints in the
route.
2. Select “EDIT” and
press the ENT key.
3. Use the LARGE knob
to move the arrow
cursor to the waypoint
to change.
4. Select “CHG” and
press ENT to change
the waypoint.
5. Use the LARGE and
SMALL knobs to
select the new
waypoint name.
When the desired
name shows on the
line, press the ENT
key to enter the
change.
6. Select “DONE” and
press the ENT key.
Apollo 360 GPS Receiver Tutorial
P/N 560-0123-01 C-21