Filter
Top Products
Section 2
Introduction to the Apollo 360
This section introduces you to the Apollo 360 and explains
how to use and switch between the unit’s operating
functions. A description of information that shows on the
display when you use each function is included at the back
of this section. Section 3 builds on the introductory
information presented here as you switch on and begin
using the Apollo 360.
The
Operating
Functions
There are five main operating functions, each performing
a different and unique task while you navigate. Each
function also provides one or more screens of information
on the display. At least one of these functions is always in
use when the unit is on. The functions operate
independently of one another, so you can switch between
them freely without disrupting navigation.
The five operating functions are:
Navigation (always active)
Menu
Goto and nearest
New waypoint
Waypoint information
As you set up and navigate a course with the Apollo 360,
you will typically use several of these operating functions.
During the trip, you will use the navigation function most
of the time to monitor your progress. To most effectively
use the Apollo 360, become well acquainted with each
operating function.
Apollo 360 GPS Receiver Introduction to the Apollo 360
P/N 560-0123-01 2-1