Filter
Top Products
4. Press the ENT key.
The selected waypoint is set as the
destination. The display shows the
navigation screen in use before the Goto
function was started in step 1.
Summary With the seed position and current time entered, and the
destination waypoint showing on the display, the Apollo
360 is ready to use to help you navigate. Before you fly,
remember to check GPS satellite signal strength andverify
the type ofpositionfixtheunitisprovidingbased on visible
satellites above you. This operation is quick and easy, as
the satellite signal strength screen is the first to show on
the display after the unit starts up.
The nextsection contains information abouthow to usethe
navigation function while you fly. A built-in simulator is
included with the Apollo 360 to help you become better
acquainted with using it. Appendix C at the back of this
manual containsa tutorial on howto start thesimulator and
practice navigating without actually flying.
Apollo 360 GPS Receiver Getting Started
P/N 560-0123-01 B 3-9