Filter
Top Products
Starting
a Route
With the route you just created showing on the screen,
select “START” and press the ENT key.
The arrow marker points to line 2, indicating the “To”
waypoint. Waypoint 7S9 on line 1 is the point of origin.
You can navigate any route you choose, but only one route
can be “started” or active atany time. You can navigate the
route in either direction, depending on your present
position. For example, if your present position is at the last
waypoint in the route, you could use this last waypoint as
the point of origin by selecting “REVERSE.” This tutorial
uses the forward direction, navigating the route the way it
was created.
With “NORMAL” selected, press the ENT key. The route
screen shows on the display with the message “ROUTE
01 IS ON” at the top of the screen. The bearing and range
to the waypoint are below the waypoint designators.
Tutorial Apollo 360 GPS Receiver
C-16 P/N 560-0123-01