Filter
Top Products
Navigation continues to the “Direct To” waypoint as
described in “Navigating the Trip” earlier in this tutorial.
Holding
or
Stopping
a Route
While navigating a route, you may want to deviate from
the route withtheintentionof later resuming the route.You
can place a route on “hold” and it will not sequence to the
next leg until you resume it, regardless of where you fly.
How to Do This
1. With the route active
or “ON,” select
“STOP” and press
the ENT key.
2. Select “HOLD” and
press the ENT key.
The route screen
shows the route is
“HOLDING.”
3. Select “RESUME” to
resume navigating
the route.
Tutorial Apollo 360 GPS Receiver
C-18 P/N 560-0123-01