Filter
Top Products
Using the simulator mode, you can select the ground speed
you “fly” the Apollo 360. Ground speed units of measure
are changeable using the “Display Units” option discussed
later in this section. All operating functions are available
while you use the simulator. After simulator use, the unit
returns automatically to the “aviation” operation mode the
next time you switch on the power.
Time
and Place
Use this option to enter your present position and set UTC
and local times as Section 3 describes. It is necessary to
enter the time and place the first time the Apollo 360 is
switched on. It is also necessary to enter this information
if the unit is switched off and moved a distance of several
hundred miles or more. Time and place information you
enter is stored in memory and need not be entered again.
Screen
Controls
This optioncontrolsoperation of thedisplay backlight,and
allows you to adjust display contrast. Turn the SMALL
knob to select backlight Off,Lo, MLo, MHi,or Hi intensity
levels. This option also allows selection of either 1-Leg or
3-Leg Route Display screens.
Note
You can also control the display backlight using the
backlight keyat thelower right of the frontpanel. Press
this key repeatedly to switch the backlight intensity
through the levels described above.
Apollo 360 GPS Receiver Menu Function Options
P/N 560-0123-01 5-5