Filter
Top Products
Section 3
Getting Started
This section explains how to get started using the
Apollo 360. Information in this section explains how to
startup the unit, checksignals from the GPS satellites,enter
a seed position, and assign a destination waypoint.
This sectionshowsyou how to quicklystart the Apollo360
and check for proper operation. It is necessary to enter a
seed position and the current time the first time you switch
the unit on.
Power up
Enter a seed position (your dealer may have already
completed this step for you)
Check satellite signal strength
Enter goto waypoint
Begin navigating
Power Up To switch the unit on, turn the power knob clockwise (the
knob is above and to the left of the display). The startup
screen shows on the display for several seconds.
Apollo 360 GPS Receiver Getting Started
P/N 560-0123-01 B 3-1