Filter
Top Products
Preparing
for the
Trip
Before you navigate a trip, determine whether you will fly
direct to a waypoint, or navigate a route of several
waypoints. This tutorial presents instructions to set up
either kind of trip. It may be helpful to first navigate direct
to a destination before setting up a route to travel.
Originating
the Trip
The Apollo 360’s simulator uses your present position as
the point of origin for the trip unlessyou havealready used
the unit to navigate a route. If this is the case, refer to the
tutorial section entitled “Navigating a Route” later in this
section, or deactivate your route and continue. These
exercises assume your present position is the point of
origin for the trip.
Assigning
aDirect
Waypoint
How to Do This
1. Press the GOTO key.
Note:
Prepare to choose a waypoint close to
your present position to keep the trip
length under approximately 40 nm.
2. Turn the SMALL knob
to select the first
character of the
destination waypoint
name.
Apollo 360 GPS Receiver Tutorial
P/N 560-0123-01 C-3