Filter
Top Products
Goto and
Nearest
Function
Screens
The paired goto and nearest functions work together,
allowing you to quickly and easily assign a destination
waypoint (goto) or to assign a waypoint near your present
position as a destination (nrst). The goto function starts
when you press the GOTO/NRST key once. Assign a
destination waypoint from the goto function screen using
the LARGE and SMALL knobs. The assigned destination
waypoint may be one you created, or a waypoint from the
built-in database. The screen shows the assigned
destination waypoint and the waypoint’s location relative
to your present position.
When you press the GOTO/NRST key again, the nearest
function starts. The nearest function screen shows a listing
of up to 30 of the waypoints nearest to your present position
and the location of each waypoint relative to your present
position. You can assign any of these waypoints as a
destination by pressing the ENT key.
Apollo 360 GPS Receiver Introduction to the Apollo 360
P/N 560-0123-01 2-11