Filter
Top Products
Use the new waypoint function to create waypoints. Press
the WPT key. The new waypoint function screen allows
you to enter a waypoint name of your choice, or you can
use the default waypoint name that the unit assigns as a
number.
Turn the LARGE knob to movethe highlightto the desired
character in thewaypoint nameto change it. Once you have
entered thedesired waypoint name,you can assign thenew
waypoint yourpresentposition coordinates by pressing the
ENT key. If you wish your new waypoint to be located
elsewhere, use the LARGE and SMALL knobs to move
the highlight and change the waypoint lat/longcoordinates.
When you are finished, press the ENT key to enter the new
waypoint into memory.
The fact that you may assign either your present position
or lat/lon coordinates of your choice when you create
waypoints is significant. You can create waypoints either
as you fly, or more conveniently, before or after you fly
when you are not busy navigating.
You can always edit or delete waypoints you have created.
The menu function “User Waypoint Management” option
allows you to perform these tasks. The use of this option
is described in Section 5.
Getting
Waypoint
Information
Use the waypoint information function anytime to get
information on waypoints in the Apollo 360’s memory,
including waypoints you have created. A complete listing
of available information is included in Section 6, that
explains the built-in waypoint database.
Navigating a Trip Apollo 360 GPS Receiver
4-12 P/N 560-0123-01