Filter
Top Products
Inserting
a
Waypoint
How to Do This
1. Choose the route you
want to insert
waypoints. You can
choose any route,
including an active
route.
2. Select “EDIT” and
press the ENT key.
3. Use the LARGE knob
to move the arrow
cursor to the
waypoint before
which the new
waypoint is to be
inserted.
4. Select “INS” and
press ENT to insert a
waypoint.
5. Use the LARGE and
SMALL knobs to
select the waypoint
name to insert. When
the desired name
shows on the line,
press the ENT key.
6. Select “DONE” and
press the ENT key.
Tutorial Apollo 360 GPS Receiver
C-20 P/N 560-0123-01