Filter
Top Products
Home
>
4. Vizomo
>
4.1 Vizomo Quick Start Guides
>
4.1.2 Connecting with Vizomo Controller
4.1.2 Connecting with Vizomo Controller
When Vizomo Controller launches, the “Connect to processor” window opens listing processors found on your LAN. You can either select one of the
processors listed or enter the IP address of another processor.
Connect to processor window:
After you select a processor, you need to log in with a user name and password. By default, the Vizomo Controller has only an admin user with the
following info:
•
User Name = admin
• Password = vision
NOTE:
If you know that you have an active Vizomo on your LAN but you can not see it listed in the processor window, check that Windows Firewall has an
exception to allow Vizomo Controller access to search for processors.
Windows Firewall settings:
NOTE:
For information on connecting to a Vizomo with RasterMAPPER see
6.6.1 Processor List
48 . 4. Vizomo
PXL System