Filter
Top Products
Home
>
6. RasterMAPPER
>
6.3 RasterMAPPER QuickStart Guides
>
6.3.1 Mapping
6.3.1 Mapping
The mapping step is necessary to tell the Vizomo the relationship between pixels in the input signal, and where those pixels are located on the modular LED
fixtures. This is accomplished by building a map of fixtures in a space representing the input pixels.
Create and Send Map
1. Download and Install RasterMAPPER.
2. Launch RasterMAPPER. A new window opens with a blank map and a 'New C-series Display' tool.
3. Define screen specifics then press Create.
4. A grid will be generated in the top left position.
118 . 6. RasterMAPPER
PXL System