Filter
Top Products
Home
>
2. C
-
series Tile
>
2.5 Power & Data Distribution
>
2.5.1 Tile Status Indicator
2.5.1 Tile Status Indicator
The colored status indicator located on the back of the C-series tile allows you to easily monitor the state of each tile.
Off
No Power (Note: the status indicator remains black for a few seconds when the tile is first powered on)
Off
Optional. Operating normally in stealth mode, when the green "normal operation" indicator may interfere with the look of the back of the wall.
In this mode, other states will still light up with the colors listed below. To enable stealth mode, the setting
system.output.pxl.disable_status_indicator must be set to true on the Vizomo processor.
White
Tile is powering up
Magenta
Tile has booted, but not yet receiving data
Orange
Top or bottom data link is working properly
Blue
Both data links are working properly
Green
Video data is being received (normal operation)
Flashing
Red
Error
2. C
-
series Tile . 27
PXL System