Filter
Top Products
Home
>
6. RasterMAPPER
>
6.6 Processor Control
>
6.6.3 webUI
6.6.3 webUI
The Vizomo webUI is a web based User Interface that contains information about the system and other advanced features such as Vizomo's command line interface.
The pages of the webUI are accessible via the red navigation bar across the top:
Overview >> System Status and Content Preview
The System Status section displays current information about the video Input devices, PXL ports of the Vizomo, Switches connected to PXL ports and nodes. In addition to system heartbeat
information, a Preview of the content is also provided.
In the image below we see all 3 indicator colors present (red, green and yellow)
• A green color rectangle indicates that the system component is functioning as expected. In the example below, there is 1 C-
series tiles in the map. The Vizomo sees that the tile is alive and all
calibration data has been received. So, the nodes indicator bars are green.
• A yellow color rectangle indicates an abnormal condition. In the example below, the SDI input does not detect a signal and both port 'C' and port "D' have been unplugged.
• A red color rectangle indicates a failure. In the example below, Port B has been connected to a 100 Mbps port of a switch rather than the Gigabit port.
Preview
To the right of the status section is a low frame rate preview of the Vizomo content.
6. RasterMAPPER . 153
PXL System