Filter
Top Products
Home
>
6. RasterMAPPER
>
6.3 RasterMAPPER QuickStart Guides
>
6.3.3 Calibration
6.3.3 Calibration
The
calibration step is necessary to copy LED calibration data from each fixture back to the Vizomo processor, where the calibration algorithms are run.
Failing to do this step may result in a speckled looking image, or fixtures that have a different color cast than their neighbors.
Retrieve Calibration Data from PXL Fixtures
1.
Click the
Calibrate... button.
2.
Click the
Retreive button to begin the process.
3. Check the status area for any errors.
6. RasterMAPPER . 123
PXL System