Filter
Top Products
Home
>
6. RasterMAPPER
>
6.2 Basic Workflow
6.2 Basic Workflow
RasterMAPPER has two main functions:
● Create a map which defines the relationship between pixels from the video source and the actual pixels on the modular LED fixtures. After creating the
map in RasterMAPPER it is uploaded and stored on the processor.
● Control and adjust the processor as needed. With C
-
Series fixtures, it is necessary to enumerate the fixtures to tell the Vizomo where they are, as well as
to retrieve calibration data from the fixtures for Vizomo to use in its color correction algorithms.
The chart below illustrates the basic RasterMAPPER workflow.
NOTE:
When using PXL protocol fixtures such as C
-
series, each time a map is changed enumerate and retrieve the calibration data.
116 . 6. RasterMAPPER
PXL System