Filter
Top Products
System manual MeDis 5MP1HM 78
10. Save your preferences by pressing the Save As button and
entering a new profile name in the Save Profile Setting dialog
box.
11. Apply your new scheme by clicking OK.
12. Click OK again to close the Display Properties Control Panel.
Installing or Reinstalling BARCO DPMS
To install or reinstall the BARCO DPMS Screen Saver insert the
CORONIS Software CD in the appropriate device on your computer
and run the BarcoMed Product Install Wizard (please see the section
Software Installation for complete instructions).
Special Note: Reinstalling the BARCO DPMS Screen Saver will over
write the DPMS configuration settings and you will need to reconfigure
the DPMS settings on your system.
Uninstalling BARCO DPMS
To remove the BARCO DPMS Screen Saver from your system insert
the CORONIS Software CD in the appropriate device on your
computer, run the BarcoMed Product Install Wizard and follow these
steps.
1. Select only the DPMS Screen Saver on the BarcoMed Product
Install Wizards welcome screen and click Install.
2. Click Next on the Welcome Screen of the BARCO DPMS
InstallShield Wizard to begin the installation (figure 37)
Figure 37
BarcoMed controller tools