Filter
Top Products
System manual MeDis 5MP1HM 45
Note: You can install the driver for only one type of BarcoMed
device at a time. If you have multiple types of BarcoMed devices
installed in your computer, you will need to rerun the installer to
install the drivers for the other devices.
11. If you selected a device with an existing driver, the wizard will
compare the existing drivers version against the version of the
driver you are installing. If the existing drivers version is newer
than the one you are installing, the wizard will warn you that the
current driver is newer than the one you are installing (figure 18).
Figure 18
Click OK to continue. If you dont want to replace the exiting
driver, click OK and then click Cancel.
12. If you are installing the BarcoMed 5MP1HM or 5MP1H skip to
step13. Step 12 applies to the 5MP2 AURA, 5MP2 and 4MP2
only.
Your selection on the Enable DualView screen determines if
DualView is enabled or not. DualView allows a dual head display
controller to display two separate desktops, one for each display
instead of a single virtual desktop that spans across both displays.
DualView is a feature that is automatically supported by Windows
XP. Figures 19 and 20 on the next page shows the difference
between running without and with DualView enabled under
Windows XP.
BarcoMed driver and software installation