Filter
Top Products
System manual MeDis 5MP1HM 64
To access the BarcoMed Hardware Tab do the following:
1. Open the Display Properties Control Panel by right clicking on the
desktop, then select Properties.
2. Under Windows NT 4.0, Click on the BarcoMed Hardware Tab
(see figure 30, below).
Under Windows 2000 and Windows XP, click on the Settings tab.
Double click on the rectangle that represents the BarcoMed
Display Controller to bring up its property page. Click on the
BarcoMed Hardware Tab (see figure 31, on the next page).
Figure 30: BarcoMed Hardware Tab
under Windows NT 4.0
BarcoMed controller tools