Filter
Top Products
System manual MeDis 5MP1HM 76
3. Click on the Settings button. The BARCO DPMS Screen Saver
Control Panel will open (see figure 35).
Figure 35: BARCO DPMS Settings Control Panel
4. Use the default schemes by selecting one of the three default
schemes. Click OK. Then Click OK again.
Note: If you make any changes to any of the settings of one of the
three default schemes, the Current Scheme field will blank and you
MUST SAVE your changes by clicking on the Save As ... button.
When you click on the Save As ... button, the name of the last
scheme you used will be automatically displayed, you can then
choose to use that scheme name or enter a new name. If you
enter a name other than one of the three default scheme names,
the program will ask you if you wish to save the scheme as a
DEFAULT scheme (see figure 36 on the next page). Click Yes to
save the settings scheme as a DEFAULT scheme, click No to
save the scheme as a PRIVATE scheme. After you have saved the
scheme, then click OK and the new scheme will be in effect.
BarcoMed controller tools