Filter
Top Products
System manual MeDis 5MP1HM 31
Figure 7
Driver Installation
7. Click Next on the Display Driver Wizards Welcome Screen to
continue or Cancel to exit the Display Driver Wizard and return
to the Software Install Wizard.
8. The Device Selection Screens dialog box should show only those
devices physically installed and supported by the BarcoMed
display controller drivers on your BarcoMed Software CD. If there
are no BarcoMed devices installed, or if Windows 2000 does not
recognized the installed devices, or if the drivers on your
BarcoMed Software CD does not support the installed devices, the
dialog box will be empty, and program will exit when the user clicks
Finish or Cancel. Select the device you want to install and
then click Next.
Note: You can install the driver for only one type of BarcoMed
device at a time. If you have multiple types of BarcoMed devices
installed in your computer, you will need to rerun the installer to
install the drivers for the other devices.
9. If you selected a device with an existing driver, the wizard will
compare the existing drivers version against the version of the
driver you are installing. If the existing drivers version is newer
than the one you are installing, the wizard will warn you that the
current driver is newer than the one you are installing (see figure 8
on the next page).
BarcoMed driver and software installation