Filter
Top Products
5 - 48
ENG
CLUTCH
4. Lubricate:
• friction plates
• clutch plates
(with the recommended lubricant)
5. Install:
• clutch damper spring seat 1
• clutch damper spring 2
• friction plate 3 3
• clutch plates 4
• friction plates 1 5, 7
• friction plates 2 6
NOTE:
_
• Install the clutch damper spring 2 with the
“OUTSIDE” mark facing out.
• First, install a friction plate and then alternate
between a clutch plate and a friction plate.
• Install friction plate 3 3 and friction plate 1
5 so that the tab with two notches a is
between the two punch marks b on the
clutch housing as shown.
• Install friction plate 1 7 so that the tab with
two notches c is between the two punch
marks d on the clutch housing as shown.
6. Install:
• clutch springs
• clutch spring bolts
NOTE:
_
• Lubricate the clutch spring threads with
engine oil.
• Tighten the clutch spring bolts in stages and
in a crisscross pattern.
7. Install:
• dowel pins
• gasket
• clutch cover
• clutch cable holder
Recommended lubricant
Engine oil
1
2
3
4
5576
a
c
d
b
7
35
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
New
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)