Filter
Top Products
3 - 61
CHK
ADJ
REPLACING THE HEADLIGHT BULB/
ADJUSTING THE HEADLIGHT BEAM
5. Install:
• headlight bulb
• headlight bulb holder
• headlight bulb holder cover
CAUTION:
_
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be
adversely affected. If the headlight bulb
gets soiled, thoroughly clean it with a cloth
moistened with alcohol or lacquer thinner.
6. Connect:
• headlight coupler
7. Install:
• front cowling
• front fork protector
• front fender
Refer to “COWLING AND COVER”.
New
EAS00186
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• headlight beam (vertically)
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Turn the adjusting screw 1 in direction a
or b.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
Direction
a
Headlight beam is low-
ered.
Direction
b
Headlight beam is
raised.
a
b
1