Filter
Top Products
5 - 30
ENG
VALVES AND VALVE SPRINGS
EAS00245
INSTALLING THE VALVES
The following procedure applies to all of the
valves and related components.
1. Deburr:
• valve stem end
(with an oil stone)
2. Lubricate:
• valve stem
1
• valve stem seal
2
(with the recommended lubricant)
Recommended lubricant
Molybdenum disulfide oil
3. Install:
• valve
1
• valve spring seat
2
• valve stem seal
3
• valve spring
4
• valve spring retainer
5
(into the cylinder head)
NOTE:
_
• Install the valve spring with the larger pitch
a
facing up.
• Install the valve spring with its painted end
facing up.
b
Smaller pitch