Filter
Top Products
3 - 58
CHK
ADJ
CHECKING AND CHARGING THE BATTERY/
CHECKING THE FUSES
6. Install:
• battery
7. Connect:
• battery leads
(to the battery terminals)
CAUTION:
_
First, connect the positive battery lead
1
,
then the negative battery lead
2
.
8. Check:
• battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
9. Lubricate:
• battery terminals
10.Install:
• battery cover
Refer to “AIR FILTER CASE”.
• seat
Refer to “COWLING AND COVER”.
Recommended lubricant
Dielectric grease
1
2
EAS00181
CHECKING THE FUSES
The following procedure applies to all of the
fuses.
CAUTION:
_
To avoid a short circuit, always set the
main switch to “OFF” when checking or
replacing a fuse.
1. Remove:
• seat
• left side panel
Refer to “COWLING AND COVER”.