Filter
Top Products
4 - 7
CHAS
FRONT WHEEL AND BRAKE DISC
4. Adjust:
• brake disc deflection
▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼ ▼▼▼▼ ▼▼▼
a. Remove the brake disc.
b. Rotate the brake disc by one bolt hole.
c. Install the brake disc.
NOTE:
_
Tighten the brake disc bolts in stages and in a
crisscross pattern.
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be
brought within specification, replace the
brake disc.
▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲ ▲▲▲▲ ▲▲▲
T
R
.
.
Brake disc bolt
23 Nm (2.3 m · kg, 17 ft · lb)
LOCTITE
®
EAS00542
INSTALLING THE FRONT WHEEL
1. Lubricate:
• oil seal lips
Recommended lubricant
Lithium-soap-based grease