Filter
Top Products
93
2. If the Position Reply is set to Manual, you can press any key. The
Attention screen will be displayed. Use W or X to select Yes
and press [ENTER] to reply to the call. Or, select
No and press
[ENTER] to cancel the reply.
Making a Position Send Call
This radio has the ability to send the position of your vessel to another
vessel using a VHF marine radio equipped with DSC.
1. Press [CALL/LIGHT].
2. At the
DSC Menu, use S and T to select Position Send.
Press [ENTER].
3. At the
Position Send screen, use S and T to select the
individual from the Directory you want to send your position to.
Note: You must have entries in your directory to make a Position Send
Call. See the Setup Section (page 35.)
4. Press [ENTER]. You will see the
Attention screen. Use W or X
to select
Yes and press [ENTER] to make the call. Or, select No
and press [ENTER] to cancel the call.
5. After the call is made, the radio returns to the
VHF screen.
Receiving a Position Send Call
1. When your MYSTIC receives a Position Send Call, the DSC
Routine tone or DSC distress tone sounds. The Position Send
screen appears, displaying the calling ship’s message category,
MMSI, time and position information.
2. Press [ESC]. The Map screen will now be displayed, with the
calling ship’s location marked on the map.
Mystic OM.book Page 93 Wednesday, October 22, 2003 8:59 PM