Filter
Top Products
35
To change the U.I.C. selection:
1. Press [MENU].
2. At the
Menu screen, use S and T to highlight VHF and press
[ENTER].
3. At the
VHF Menu screen, use S and T to highlight U.I.C. and
press [ENTER].
4. At the
U.I.C. Selection Menu, use S and T to highlight the
selection you want, and press [ENTER].
5. You will be returned to the VHF screen, with the appropriate icon
(
USA, INT, or CAN) displayed.
Directory
The Directory is used to store the names of ships. These names are used
for Digital Selective Calling (DSC). The DSC functions are covered in
Advanced VHF Operations, beginning on page 90.
To enter names in the Directory:
1. Press [MENU].
2. At the
Menu screen, use S and T to highlight VHF and press
[ENTER].
3. At the
VHF Menu screen, use S and T to highlight Directory
and press [ENTER].
4. The only entry you should see at the
Directory screen at this
point is
New User. Press [ENTER].
5. At the Edit User screen, press [ENTER]. The
Name field is
highlighted, indicating you can enter a ship’s name. Press
[ENTER].
6. Use the alphanumeric keypad to enter the data using the
technique covered in the previous Section (“Entering Data” on
page 28). Directory names can be up to 12 characters long.
7. When you have entered the Ship’s Name, highlight
OK and press
[ENTER] to accept the entry. The MMSI field is now highlighted.
Press [ENTER]. Use the technique shown on page 31 to enter the
Ship’s MMSI number. When you are finished, press [ENTER].
Highlight
OK and press [ENTER] to store the information in the
Directory.
You can now add more Ship’s Names and MMSI numbers using the same
procedure. You can enter up to names in the directory. If you try to add
more than 99, you’ll see an
ERROR message.
Mystic OM.book Page 35 Wednesday, October 22, 2003 8:59 PM