Filter
Top Products
62
NMEA
You can select the NMEA message that will be output from the
MYSTIC when it is in the charging cradle and connected to a
computer with the data cable. The choices are Off, V1.5 APA, V1.5
XTE or V2.1 GSA. Your choice depends on what message the device
you are connecting to needs to receive. The default is Off.
Baud Rate
You can set the baud rate of the data being transmitted and received
through the data cable attached to the charging cradle. The baud rate
must match the baud rate that the receiving device is set for. You can
choose from 1200 baud, 4800 baud, 9600 baud, 19200 baud, 57600
baud or 115200 baud. When you are loading maps using MapSend™
Streets and Destinations USA (see page118), the baud rate can be
determined automatically determined. The default is 4800 baud.
Language
You can select the language that the MYSTIC uses to display text.
Customizing the Navigation Screens
From the basic Channel display, press the [ESC] key to access the
navigation screens. The navigation screens are displayed in the following
sequence:
z VHF screen
z Map screen
z Compass screen
z Large data screen
z Position screen 1
z Position screen 2
z Road screen
z Data screen
z Speed screen
z Sat Status screen
If all nine navigation screens are active, you’ll move to the next one with
each press of the [ESC] key. If you turn off any screens in Setup, they will
not be displayed.
Mystic OM.book Page 62 Wednesday, October 22, 2003 8:59 PM