Filter
Top Products
33
MYSTIC
Setup
Most of the options are set up beginning with the [MENU] key. After that, it
is a matter of selecting (highlighting) the option you want to set up or edit,
pressing [ENTER], and going through the various menus and screens.
The techniques for entering or editing data are covered in the previous
Section, beginning on page 29.
Select Operating Mode (RF Select)
You can set your MYSTIC to operate in one of three Modes:
z MRN Only.
In this Mode, you can use the radio as a Marine radio only, and you
have no GPS functions.
z GPS only.
In this Mode, only the GPS functions will work, and you will not
receive any Marine signals.
z MRN & GPS.
In this Mode, all functions of the MYSTIC are in use. This is the factory
default setting.
To select the operating Mode:
1. Press [MENU].
2. At the
Menu screen, select Setup and press [ENTER].
3. At the
Setup Menu, select RF Select and press [ENTER].
4. Select the Mode you want and press [ENTER].
This will set the radio to that Mode and return to a screen
depending on your setting.
Mystic OM.book Page 33 Wednesday, October 22, 2003 8:59 PM