Filter
Top Products
39
To add a Channel TAG
1. Press [MENU].
2. At the
Menu screen, select VHF and press [ENTER].
3. At the
VHF Menu screen, select Channel TAG and press
[ENTER].
4. At the Channel TAG screen, select the group of channels (United
States, International, or Canadian) you will tag and press
[ENTER].
5. You will proceed to the
Channel TAG yyy list. (yyy is USA, INT,
or CAN.)
6. Select the Channel number you want to add a tag to and press
[ENTER].
7. Since this is the first Channel you are adding a tag to, you will see
the familiar alphanumeric keypad you used to enter a ship’s name
in the directory.
8. Use the keypad as you did in the procedures above to enter a tag
for that Channel.
(Reminder: The tag can be no more than 12 characters long.)
9. When you are finished and press [ENTER] at the
OK button, you
will return to the
Channel TAG yyy list. At this point you can add
a Channel Tag to another Channel, using the same procedure.
Editing or Restoring a TAG
You can edit a Channel Tag using the same procedure as with FIPS or
Directory entry. You can also Restore a Channel Tag to the default
value.
1. Select the Channel and press [MENU].
2. Select
Restore TAG, and press [ENTER]. The Channel TAG is
restored to the default value.
Mystic OM.book Page 39 Wednesday, October 22, 2003 8:59 PM